SMD Tweezer
SMD Tweezer          
         
L
1-1PK-TZ001.gif (6175 bytes)
  1PK-TZ001
For placing and soldering 1mm wide monolithic chip capacitors.
Grooved tips. Anti-crush device, 4-3/4" long(120mm)
L
2-1PK-TZ002.gif (6601 bytes)
  1PK-TZ002
Same usage as TZ001 but tips have a 45degree.gif (50 bytes)ngle and are
w/o anti-crush device, 4-3/4" long(120mm)
L
3-1PK-TZ003.gif (7164 bytes)
  1PK-TZ003
For handling /positioning 3 lead SOT packages, monolithic
chip capacitors, etc., 4-3/4" long (120mm)
L
4-1PK-TZ004.gif (7641 bytes)
  1PK-TZ004
For positioning 5mm monolithic chip capacitors at
60degree.gif (50 bytes)angle. Grooved tips, 4-3/4" long (120mm)
L
5-1PK-TZ005.gif (8254 bytes)
  1PK-TZ005
Grooved tips at 30degree.gif (50 bytes) angle for holding and positioning
cylindrical devices, 4-3/4" long (120mm)
L
6-1PK-TZ006.gif (8244 bytes)
  1PK-TZ006
For positioning all flat devices at 60degree.gif (50 bytes) angle,
4-3/4" long (120mm)
L
7-1PK-TZ007.gif (6849 bytes)
  1PK-TZ007
Has one full tip and one hollow tip allowing lead entry.