The PC Cable Tester is a stand- along
test device, it designed to provide you
to test the popular used PC data cables
(Optional advanced model can test two
more cables such as the USB and 1394)
for identified the wires connecting
status-open, shorted, cross, miss-wire
and continuity wires.It is a very good tool
for most cable dealers, cable assembly
house or system integrators to quickly
check the pin configuration or trouble
shooting in every work environment.

Features
Can test the most used PC data cab1es, network cables such as printer cable, monitor cable, modem
    cable, mouse extension cable, game cable, (USB and 1394 cables are for optional advanced model),
    BNC coax cable, RJ45 cable etc. for open, shorted miss-wire, continuity and pin configuration.
LED glow enhanced for printer cable test
Auto and manual scans can be selected
DC battery compartment and AC power adapter jack provided
Handy held, easy access, simple installation and operation

FIND A CABLE PROBLEM WITH THE SCSI &
UNIVERSAL CABLE TESTER

Do you have a headache trying to find if your SCSI
connection has a problem? How will you know if
your expensive high density SCSI cable will work
properly? The SCSI & Universal cable tester is the
perfect solution. It can check up cable pin configuration
up to 68 wires by comparing one transmitting end to
the other corresponding receiving end. It can easily
test for cable continuity, miss-wire, open, and shorted
wires. Also, with the optional PC or MAC Cable Test
Interface Unit, it can be expanded to test most of PC
or MAC. Cables, too, such as data cable, multimedia
cables, Powerbook cables, Ethernet cables, modular
cables, and even the upcoming USB cables. If you own
the complete SCSI & Universal Cable Tester Kit you will
be no more headache to find out your cable problems.

Features
Can test cable up to 68 wires.
With optional PC or MAC. Cable Test interface Unit it can be expanded to test most of PC and MAC data cables,
    multimedia cables, Powerbook cables, Ethernet cables, modular cables and even the upcoming USB cables.
Can test cable shielding, too.
Automatically or manually scans the test result in sequence.
Cables selector can select any different combinations of wire numbers and save scanning time.
Adjustable scanning speed.
Low battery power equipped to warn you that batterypower has been exhusted and need to be replaced.

Diagnose Ethernet problem fast ,Save your expensive repair time

Diagnose Hub 10 Base-T end

Specifications

LANtest (Network & Modular Cable Tester)

LANtest is a newly designed and very practical tester
that can easily read the correct pin configuration of 10
Base-T cable (Category 5), 10Base-2 cable (coax),
RJ45/RJ11 modular cables, 356A, TIA-568 A/568B and
Token Ring cable by comparing one transmitting end to
the corresponding receiving end. With the remote kit it
can test cables installed far away either on wall plate or
patch panel. It is easy to verify the cable continuity, open,
short and cross-connect. It's affordable, so you can benefit
the most.

Features
Can test the correct pin configuration of 10Base-T 10 Base-2 Thin Ethernet cable, RJ45/RJ11 modular cables 356A,
    TIA-568A/568B and Token Ring cable, etc
Easy to verify cable continuity, open, short and miss-wire
With remote kit, it can remotely test cable up to 1000 ft away either on wall plate or patch panel
Can test the grounding
Features with auto or manual scan for pin-out indicators
A power switch is provided for saving battery power

Connector: RJ-45, RJ-11, MiniDin 3-pin,
    BNC?LEDs 5 : Testing, Short, No
    connection/No termination, No-parallel/
    50 ohm terminator, connection/25 ohm
    terminator
Power: 9V battery
EMR/RFI : CE approved

FEATURES:
Simple one step operation
Power supplied by 9V battery
Palm size design, easy to carry around
Five multiple testing function:
    1. Open/Short wiring test
    2. Connected wires display
    3. No wire and terminator indication
    4. Wrong connection/non-parallel
        connection
    5. Ethernet 10BASE2 terminator value
        detection
Four types of connectors provided to test
    a variety of LAN cables
Separate module design for testing two
    remote ends
Automatic deactivation for power saving